Setting MOZILLA FIREFOX | Tips For Quick Add

Turn off QoS.

Called a complete QoS Quality of Service provided with the aim to ensure your network works well. But the truth is not so useful but certainly it can take up to 20% of your bandwidth. You can try and see the difference when QoS is disabled.

Mozilla Firefox Settings


If you are using Windows XP Professional, follow these steps turn off QoS:

* Click Start, then Run.
* Type "gpedit.msc" in the stuffing box, then hit enter. (If you can not just continue k no. 2)
* In the Local Computer Policy, click the plus sign on Computer Configuration, then click again in the Administrative Templates.
* Click the plus sign on Network and select QoS Packet Scheduler.
* On the right side of the box, double-click on Limit Reservable Bandwidth.
* On the Settings tab, select Enabled.
* In the Bandwidth Limit% box, replace the contents to be 0%. (Do not leave empty its contents)
* Click OK.

If using Windows Home Edition, follow these steps:

* Click Start and then select Settings.




* Select Control Panel, and open the Network Connections
* Right click on Local Area Connection and select Properties.
* On the General tab, missing a check in the QoS.


Special setting in Firefox 3.0

1. Firefox-3.0 Enable your browser and type the command "about: config" (without the quotes), in the address bar.
2. You will be taken to the configuration page Firefox-3.0. If there is a warning to be careful changing the settings on the page, just click yes or ok.
3. In the filter search bar on the configuration page, type "network.http.pipelining". Make sure valuenya already set with the value "true". If you're still "false", double click to make it "true".
4. Back to the filter search bar, type "network.http.pipelining.maxrequests". Double click on this option and change its value (value) to 8.
5. Back to the filter search bar, type "network.http.proxy.pipelining", double click to change valuenya become 'true'.
6. Back to the filter search bar, type "network.dns.disableIPv6". Double click to change the value to 'true'.
7. Right-click anywhere on the configuration page is up, select new -> boolean. Type in "content.interrupt.parsing" in the popup windows that appear and then click OK. When prompted for a choice appears, select 'true'.
8. Back right-click a configuration page, select new -> integer. Type in "content.max.tokenizing.time". Value that appears at the prompt enter the value 2.25 million.
9. Back right-click a configuration page, select new -> integer. Type in "content.notify.interval". Enter the value 750 000 at the prompt that appears.
10. Back right-click a configuration page, select new -> boolean. Type in "content.notify.ontimer". Select 'true' value for the field prompt that appears.
11. Back right-click a configuration page, select new -> integer. Type in "content.notify.backoffcount". At the prompt that appears input the value value '5 '.
12. Back right-click a configuration page, select new -> integer. Type in "content.switch.threshold". Fill in the value of an integer value 750 000 at the prompt that appears.
13. Finally, again right click on the configuration page, select new -> integer. Type in "nglayout.initialpaint.delay". Set the value '0 'at the prompt field value that appears.


DO NOT FORGET TO HIS restart Firefox, AND FEEL the difference! Or

Maybe you want to find best gadgets